CE-7000 Series - Grit Rolling Plotter
CE7000 - Features
User-friendly control panel- 3.7 inch LCD display and,easy-to-use control panel supports 10 languages.
Four sizes to match all requirements – CE7000-40, CE7000-60, CE7000-130, CE7000-160
Career Sheet Table- It is an optional item that can be attached to the front and back of the cutting plotter to support a carrier sheet.
Enhanced Performance- With a maximum cutting force of 4.41N (450gf) and maximum cutting speed of 1000 mm/s (*1), it enables cutting various media with high productivity.
The media stocker helps stabilize the feeding of media. Adjusting the pressure of the middle push roller to the media in three levels, it prevents the media from floating. In addition, by using an optional special basket, stability in long cuts can be achieved.
When cutting data designed with Cutting Master 5 or Graphtec Studio 2 are saved to USB flash memory, it can be output directly to the cutting plotter by plugging in. This simplified workflow enables users to operate without a computer.
Software
Graphtec Design Software
Graphtec Studio 2 (Windows / Mac)
This software allows you to create and edit cut data and send it to cutting plotters. The intuitive design creation tool makes it easy for anyone to use.
Adobe Illustrator / CorelDRAW plug-in software
Cutting Master 5 (Windows / Mac)
Cutting Master 4Cutting Master 5 is Graphtec plug-in software for Adobe Illustrator and CorelDRAW Graphic Suite.
It includes convenient functions such as synchronizing cutting conditions between the software and cutting plotters. Cutting Master 5 is easy to use and enables you to get the best performance from your plotter.
Technical Parameters
Specifications
|
Item |
CE7000-40 |
CE7000-60 |
CE7000-130 |
Cutting area of guaranteed accuracy (*1) |
|
|
|
Configuration |
Grit rolling type |
|
||||
|
Drive method |
Digital servo drive |
|
||||
|
Max. cutting area (W x L) (*1) |
375ｍｍ × 50ｍ |
603ｍｍ × 50ｍ |
1270ｍｍ × 50ｍ |
1524ｍｍ × 50ｍ |
|
|
|
Max. 0.1 mm in the plot up to 2 m (Excluding media expansion and contraction) |
355ｍｍ × 2ｍ |
583ｍｍ × 2m |
1250ｍｍ × 2m |
1504ｍｍ × 2m |
|
|
|
Mountable media width |
Min. |
50mm |
|
|||
|
Max. |
484ｍｍ (19inch) |
712mm (28inch) |
1372mm (54inch) |
1626mm (64inch) |
|
|
|
Mountable roll media mass |
5 kg |
9 kg |
17 kg |
20 kg |
|
|
|
Number of push rollers |
2 rollers |
4 rollers (Max. 5 (option)) |
|
|||
|
Max. cutting speed |
600mm/s |
900mm/s |
1000mm/s at 45° direction |
|
||
|
Acceleration |
21.2ｍ/s2 at 45° direction |
13.9m/s2 at 45° direction |
|
|||
|
Cutting force |
Max. 4.41N (450gf) |
|
||||
|
Minimum character size |
Approx. 5 mm alphanumeric (varies depending on character font and media) |
|
||||
|
Mechanical resolution |
0.005mm |
|
||||
|
Programmable resolution |
GP-GL：0.1/0.05/0.025/0.01ｍｍ HP-GL™ (*2)：0.025ｍｍ |
|
||||
|
Repeatability (*1) |
Up to 0.25mm thickness |
|
||||
|
Mountable number of tools |
1 tool |
|
||||
|
Blade types |
Supersteel |
|
||||
|
Pen types |
Oil-based ballpoint pen, Water-based fiber-tip pen |
|
||||
|
Media types |
Up to 0.25mm thickness |
|
||||
|
Interface |
USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX |
|
||||
|
Buffer memory |
2MB |
|
||||
|
Command sets |
GP-GL / HP-GL™ (Set by command or auto-detect) (*2) |
|
||||
|
Display |
Graphic type LCD with back-light (240dots x 128dots), supports 10 languages |
|
||||
|
Power source |
100V to 240V AC, 50 / 60 Hz |
|
||||
|
Power consumption |
Up to 100W |
|
||||
|
Operating environment |
10 to 35 ºC, 35 to 75 % R.H. (non-condensing) |
|
||||
|
Guaranteed accuracy environment |
16 to 32 ºC, 35 to 70 % R.H. (non-condensing) |
|
||||
|
External dimensions (approx. W x D x H) |
772ｘ292ｘ313 mm |
1005×582×1092 mm |
1704×811×1215 mm |
1916×811×1215 mm |
||
|
Weight (approx.) |
13kg |
23kg |
51kg |
55kg |
||
|
Graphtec Studio 2, Cutting Master 5, Windows Driver, |
|
|||||
Standard Accessories
|
A standard accessory for CE7000-40/-60 (* Not available for CE7000-60 in specific areas.) |
Q’ty |
Description |
|
Power cord |
1 |
The type of cord is different by destination. |
|
USB Cable |
1 |
2.9m long |
|
Cutting blade holder |
1 |
PHP33-CB09N-HS |
|
Cutting Blade |
1 |
CB09UB-1P |
|
Loupe |
1 |
PM-CT-001 |
|
Fiber-tip pen holder |
1 |
PHP31-FIBER |
|
Water-based Fiber-tip pen |
1 |
KF700-BK (black) |
|
Roll Media Tray |
1 |
A standard accessory for 130 / 160 |
|
Stand for CE7000 |
1 |
A standard accessory for CE7000-40/-60 (* Not available for CE7000-60 in specific area.) |
|
Printed document |
1 |
Setup Manual, Safety Manual |
Option
|
Item |
Part No. |
Description |
|
Basket for CE7000 series |
PG0103 |
For CE7000-60 |
|
PG0104 |
For CE7000-130 |
|
|
PG0105 |
For CE7000-160 |
|
|
Carrier sheet table |
OPH-A45 |
For CE7000-40 or CE7000-60 |
|
Additional push roller kit |
OPH-A49 |
Only for CE7000-130/CE7000-160 |
|
Optional Stand |
ST0118 |
For CE7000-60 |
Samples
.
Acrylic cutting
.
Model cutting
.
FC9000 Series (High Grit Rolling Cutting Plotter)
FC9000 - Features
Highest Level Performance- 1485mm/s maximum cutting speed, 39.2m/s2 maximum acceleration, 5.88N (600gf) maximum cutting force. The FC9000 Series offers best-in-class productivity and abilities with a wider range of media from thick to thin.
Sizes to match all requirements – CE7000-140, CE7000-160
Auto Panelling- To prevent skew of long-length cutting, this function makes it possible to automatically split long-length jobs into smaller pages that are cut sequentially. It shortens feed length and enables stable cutting. It is useful for cutting with higher accuracy or beyond the guaranteed long length.
Data output via USB flash memory without PC- When cutting data designed with Cutting Master 5 or Graphtec Studio 2 are saved to USB flash memory, it can be output directly to the cutting plotter by plugging in. This simplified workflow enables users to operate without a computer.
User-friendly control panel- 3.7inch LCD display and, easy-to-use control panel supports 10 languages.
Improved ARMS for high-precision cutting (ARMS 8.0)- The Advanced Registration Mark Sensing system delivers precise Print & Cut results by using sensors to detect registration marks and perform axis alignment. Countless efficiency-boosting features improve productivity for print & cut applications such as stickers and decals.
Software - Grit Rolling Plotter
Specifications
|
Item |
FC9000-140 |
FC9000-160 |
|
Configuration |
Grit rolling type |
|
|
Drive method |
Digital servo drive |
|
|
Max. cutting area (W x L) (*1) |
1372mm × 50m |
1626mm × 50m |
|
Cutting area of guaranteed accuracy (*1) |
1352mm × 10m |
1607mm × 10m |
|
Mountable media width (*2) |
Min. 50mm |
|
|
Maximum cross-cut width |
Max. 1850mm |
|
|
Mountable roll media diameter |
76 to 200mm (160mm when the optional paper ‑ange (OPH-A21) is installed) |
|
|
Mountable roll media mass |
20kg |
24kg |
|
Compatible take-up roll width |
200 to 1372mm |
200 to 1626mm |
|
Compatible take-up roll mass |
20kg |
|
|
Max. 1850mm |
1372mm |
1626mm |
|
Max. cutting speed |
1485mm/s at 45° direction |
|
|
Axial acceleration |
Max. 39.2m/s2 at 45° direction |
|
|
Cutting force |
Max. 5.88N (600gf) |
|
|
Minimum character size |
Approx. 5 mm alphanumeric (varies depending on character font and media) |
|
|
Mechanical resolution |
0.005mm |
|
|
Programmable resolution |
“GP-GL：0.1 / 0.05 / 0.025 / 0.01mm |
|
|
Repeatability (*1) |
Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction) |
|
|
Number of push rollers |
4 rollers (Max. 5 (option)) |
|
|
Mountable number of tools |
1 tool (mountable 2 tools (option)) |
|
|
Blade types |
Supersteel |
|
|
Pen types |
Oil-based ballpoint pen, Water-based fiber-tip pen |
|
|
Media types |
Thickness 0.25mm or less Marking film (PVC film/fluorescence / reflective), Polyester film (on condition), |
|
|
Display |
Graphic type LCD with back-light (240dots × 128dots), supports 10 languages |
|
|
Interface |
USB 2.0(Full Speed), Ethernet 10BASE-T/100BASE-TX |
|
|
Buffer memory |
2MB |
|
|
Command sets |
GP-GL / HP-GL™ (Set by command or auto-detect) (*3) |
|
|
Graphtec Studio 2, Cutting Master 5, Windows Driver, |
||
|
Power source |
100 V to 240 V AC, 50 / 60 Hz |
|
|
Power consumption |
Max. 120 W |
|
|
Operating environment |
10 to 35 ºC, 35 to 75 % R.H. (non-condensing) |
|
|
Guaranteed accuracy environment |
16 to 32 ºC, 35 to 70 % R.H. (non-condensing) |
|
|
External dimensions (W × D × H) |
Approx. |
Approx. |
|
Weight (approx.) |
64.0 kg (80.9kg with installed automatic take-up roller) |
70.0 kg (88.5kg with installed automatic take-up roller) |
|
Safety |
PSE, UL/cUL, CE mark |
|
|
EMC |
VCCI Class A, FCC Class A, CE mark |
|
Standard Accessories
|
Item |
Q’ty |
Description |
|
Power cord |
1 |
The type of cord is different by destination. |
|
USB Cable |
1 |
2.9m long |
|
Cutting blade holder |
1 |
PHP33-CB09N-HS |
|
Cutting Blade |
1 |
CB09UB-1P |
|
Loupe |
1 |
PM-CT-001 |
|
Fiber-tip pen holder |
1 |
PHP31-FIBER |
|
Water-based Fiber-tip pen |
1 |
KF700-BK (black) |
|
Stand |
1 |
|
|
Media Stocker |
1 |
|
|
Basket |
1 |
|
|
Flange set |
1 |
OPH-A21 (Only in limited sales area.) |
|
Printed document |
1 |
Setup Manual, Safety Manual |
Option
|
Item |
Part No. |
Description |
|
Automatic Take-up Roller |
OPH-A43 |
For FC9000-140 |
|
OPH-A44 |
For FC9000-160 |
|
|
Additional push roller kit |
OPH-A47 |
For FC9000-140 or FC9000-160 |
|
2nd pen holder |
ECK0013 |
For dual tool configuration (dealer option) |
|
Flange |
OPH-A21 |
Flange for media holding |
Technical Parameters
Specifications
|
Item |
CE7000-40 |
CE7000-60 |
CE7000-130 |
Cutting area of guaranteed accuracy (*1) |
|
|
|
Configuration |
Grit rolling type |
|
||||
|
Drive method |
Digital servo drive |
|
||||
|
Max. cutting area (W x L) (*1) |
375ｍｍ × 50ｍ |
603ｍｍ × 50ｍ |
1270ｍｍ × 50ｍ |
1524ｍｍ × 50ｍ |
|
|
|
Max. 0.1 mm in the plot up to 2 m (Excluding media expansion and contraction) |
355ｍｍ × 2ｍ |
583ｍｍ × 2m |
1250ｍｍ × 2m |
1504ｍｍ × 2m |
|
|
|
Mountable media width |
Min. |
50mm |
|
|||
|
Max. |
484ｍｍ (19inch) |
712mm (28inch) |
1372mm (54inch) |
1626mm (64inch) |
|
|
|
Mountable roll media mass |
5 kg |
9 kg |
17 kg |
20 kg |
|
|
|
Number of push rollers |
2 rollers |
4 rollers (Max. 5 (option)) |
|
|||
|
Max. cutting speed |
600mm/s |
900mm/s |
1000mm/s at 45° direction |
|
||
|
Acceleration |
21.2ｍ/s2 at 45° direction |
13.9m/s2 at 45° direction |
|
|||
|
Cutting force |
Max. 4.41N (450gf) |
|
||||
|
Minimum character size |
Approx. 5 mm alphanumeric (varies depending on character font and media) |
|
||||
|
Mechanical resolution |
0.005mm |
|
||||
|
Programmable resolution |
GP-GL：0.1/0.05/0.025/0.01ｍｍ HP-GL™ (*2)：0.025ｍｍ |
|
||||
|
Repeatability (*1) |
Up to 0.25mm thickness |
|
||||
|
Mountable number of tools |
1 tool |
|
||||
|
Blade types |
Supersteel |
|
||||
|
Pen types |
Oil-based ballpoint pen, Water-based fiber-tip pen |
|
||||
|
Media types |
Up to 0.25mm thickness |
|
||||
|
Interface |
USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX |
|
||||
|
Buffer memory |
2MB |
|
||||
|
Command sets |
GP-GL / HP-GL™ (Set by command or auto-detect) (*2) |
|
||||
|
Display |
Graphic type LCD with back-light (240dots x 128dots), supports 10 languages |
|
||||
|
Power source |
100V to 240V AC, 50 / 60 Hz |
|
||||
|
Power consumption |
Up to 100W |
|
||||
|
Operating environment |
10 to 35 ºC, 35 to 75 % R.H. (non-condensing) |
|
||||
|
Guaranteed accuracy environment |
16 to 32 ºC, 35 to 70 % R.H. (non-condensing) |
|
||||
|
External dimensions (approx. W x D x H) |
772ｘ292ｘ313 mm |
1005×582×1092 mm |
1704×811×1215 mm |
1916×811×1215 mm |
||
|
Weight (approx.) |
13kg |
23kg |
51kg |
55kg |
||
|
Graphtec Studio 2, Cutting Master 5, Windows Driver, |
|
|||||
Standard Accessories
|
A standard accessory for CE7000-40/-60 (* Not available for CE7000-60 in specific areas.) |
Q’ty |
Description |
|
Power cord |
1 |
The type of cord is different by destination. |
|
USB Cable |
1 |
2.9m long |
|
Cutting blade holder |
1 |
PHP33-CB09N-HS |
|
Cutting Blade |
1 |
CB09UB-1P |
|
Loupe |
1 |
PM-CT-001 |
|
Fiber-tip pen holder |
1 |
PHP31-FIBER |
|
Water-based Fiber-tip pen |
1 |
KF700-BK (black) |
|
Roll Media Tray |
1 |
A standard accessory for 130 / 160 |
|
Stand for CE7000 |
1 |
A standard accessory for CE7000-40/-60 (* Not available for CE7000-60 in specific area.) |
|
Printed document |
1 |
Setup Manual, Safety Manual |
Option
|
Item |
Part No. |
Description |
|
Basket for CE7000 series |
PG0103 |
For CE7000-60 |
|
PG0104 |
For CE7000-130 |
|
|
PG0105 |
For CE7000-160 |
|
|
Carrier sheet table |
OPH-A45 |
For CE7000-40 or CE7000-60 |
|
Additional push roller kit |
OPH-A49 |
Only for CE7000-130/CE7000-160 |
|
Optional Stand |
ST0118 |
For CE7000-60 |
Samples
MDF cutting
.
Acrylic cutting
.
Model cutting
.